What is PP material

- Nov 28, 2017 -


What is PP material

PP plastic also known as Polypropylene, is a thermoplastic resin obtained by the polymerization of propylene.PP material has a lower heat distortion temperature (100 ℃), low transparency, low gloss, low rigidity, but have a stronger impact strength, PP impact strength increases with ethylene content increases. Vicat softening temperature of PP is 150 ℃. Due to the high degree of crystallinity, the material has very good surface stiffness and scratch resistance. PP does not exist environmental stress cracking problems.


timg (2)_副本.jpg


Characteristic

Non-toxic, tasteless, low density, strength, stiffness, hardness, heat resistance are better than low-pressure polyethylene, can be used at about 100 ℃. Has good dielectric properties and high frequency insulation and is not affected by humidity, but brittle at low temperatures, not wear-resistant, easy to aging. Suitable for the production of general machinery parts, corrosion-resistant parts and insulation parts. Common acid, alkali and other organic solvents it almost does not work, can be used for utensils.


Polypropylene.jpg


Polypropylene has many excellent features:

1, the relative density of small, only 0.89-0.91, is one of the lightest varieties of plastic.

2, good mechanical properties, in addition to impact resistance, the other mechanical properties are better than polyethylene, forming a good performance.

3, with high heat resistance, continuous use temperature up to 110-120 ℃.

4, good chemical properties, almost no water, and the vast majority of chemicals do not respond.

5, the texture is pure, non-toxic.

6, good electrical insulation.

7, the transparency of polypropylene products than high-density polyethylene products, good transparency.

It has many advantages but also disadvantages:

1, poor cold resistance, low temperature impact strength.

2, products in use susceptible to light, heat and oxygen and aging.

3, coloring is not good.

4, easy to burn.



Welcome To Contact Us

Hangzhou Fulinde Display Manufacturer
Add:No.17 Xingfa Road,Xingqiao Street,Yuhang,Hangzhou,Zhejiang
Tel:+86-571-86238578
Fax:+86-571-86161891
Ph:+8615088781033
E-mail:christineho@fuldpop.com.cn



Related Industry Knowledge

Related Products