Attention To The Processing Of Organic Glass POP Stand.

After processing and finishing of acrylic products, there are four points that need our attention:

First, the ordinary acrylic thermal deformation stability about 100 degrees or so, so in the use of acrylic products should pay attention to the temperature, such as at the time of continuous use temperature should not be higher than 90 degrees.

Second, the surface hardness of acrylic products is equal to aluminum, so be careful to avoid scratches when using or acrylic processing. If the scratches can be polished to restore the original gloss surface.

Third, in the minor scratch or caused by electrostatic adsorption of dust of acrylic products fuzzy or unclean can use dipped 1% of soap and water in conjunction with the soft cloth to wipe clean can.

Fourth, it is in the process of acrylic products assembly need to pay attention to details, because the coefficient of expansion of acrylic has certain, so must take into account when installing heat bilges cold shrink factor of acrylic, must leave expansion of space when assembly clearance.